MTH Electric Trains PREMIER GP 7/9 Operations Instructions Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
21
Premier GP-7/9 Operating Manual
Programming FYS Operation
-
Reset Feature 28-(5 Clanks, 3 Clinks)
Reset Feature 28 allows you to turn the operation of the FYS sequence on
or off. When OFF, the FYS will not activate. To use, cycle to Reset 28 and
press the Whistle button. The engine will play a series of bells. This
indicates the current setting. Each time the Whistle button is pressed,
Proto-Sound® will cycle
to the next available
setting and provide the
appropriate bell indicator.
The settings for Reset 28
are 1 Bell = ON, 2 Bells =
OFF. When the desired
setting is reached, lock the
changes by interrupting
the throttle and cycling the
engine into forward.
Activating Remote Lock-Out Control - Reset Feature 40-(8
Clanks, 0 Clinks)
Reset Feature 40 allows you to enable the Reverse Unit Lockout feature of
Proto-Sound®. When enabled, you are able to lock the engine to run in
only one of the directional states (Forward, Neutral or Reverse) whenever
power is applied. The most common use for locking out an engine is in the
use of power blocks on a
layout. To use, cycle to
Reset 40 and press the
Whistle button. The engine
will play a series of bells.
This indicates the current
setting. Each time the
Whistle button is pressed,
Proto-Sound® will cycle to
the next available setting
and provide the appropriate
bell indicator. The settings for Reset 40 are 1 Bell = OFF, 2 Bells = ON.
When the desired setting is reached, lock the changes by interrupting the
throttle and cycling the engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
40 Times
Listen For 8 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Lock-Out Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
28 Times
Listen For 5 Clank
And 3 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The FYS Setting
H
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comments to this Manuals

No comments