MTH Electric Trains PREMIER GP 7/9 Operator's Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
RailKing GP-7/9 Diesel Engine 17
forced out of the stack by a small electric fan. Smoke volume is controlled by the
Proto-Sound 2.0 system.
With a few easy maintenance steps, you should enjoy trouble-free smoke unit operation
for years.
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (see Fig. 10). We recommend M.T.H. ProtoSmoke, Seuthe, LGB, or LVTS
fluids. Do not overfill the unit or the fluid may leak out and coat the interior engine
components.
If you choose not to add the fluid (or have already added the fluid but choose to run
smoke-free), turn off the smoke unit switch located under the engine. Failure either to
add fluid to the unit or to turn it off may damage the smoke unit heating element and/or
wicking material.
When the smoke output while running the engine begins to diminish, add another 10-15
drops of smoke fluid or turn the smoke unit off.
When storing the unit for long periods of time, you may want to add about 15 drops of
fluid to prevent the wick from drying out.
After removing the engine from storage, add another 25 drops of fluid, letting the wick
soak up the fluid for 15 minutes prior to operation.
If you experience poor or no smoke output
when the smoke unit is on and has fluid,
check the wick to see if it has become hard,
blackened, and unabsorbent around the
heating element. After removing the
locomotive body from its chassis (See
Figure 5), remove the smoke unit inspection
cover (see Fig. 11). After removing the
inspection cover screws, lift the inspection
plate away and inspect the wick. If it is
darkly discolored and hard, it should be
replaced.
Replacement parts and wick replacement
instructions are available directly from the M.T.H. Parts Department (order online:
www.mth-railking.com, e-mail: [email protected]; mail: 7020 Columbia Gateway
Drive, Columbia MD 21046-1532, FAX: 410-381-6122).
Inspection Cover
Screws
Figure 12: Inspecting The Smoke Unit Wick
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Comments to this Manuals

No comments