MTH Electric Trains PREMIER GP 7/9 Operator's Manual download pdf (Page 15)

RailKing GP-7/9 Diesel Engine 15

Locomotive Light Bulb Replacement

To replace the light bulb in the locomotive, follow these instructions:

Follow the cab removal instructions found in the “Lubrication and Greasing” section of

this booklet. Once the body has been removed, remove the lights as shown in Fi g. 5 and

replace it.

You can obtain replacement bulbs directly from the M.T.H. Parts Department.

The locomotive’s headlight is controlled by a constant voltage circuit in the engine. The

headlight is easy to remove and replace when it burns out. The bulb has a quick

disconnect plug that attaches the bulb harness to a connector terminal inside the body

shell. Replacement bulbs are available directly from the M.T.H. Parts Department.

Follow the body removal instructions found in the Lubrication and Greasing Instructions.

Gently disconnect the bulb harness from the socket on the constant voltage circuit or

connector terminal and replace the bulb.

The special NiCad 7-cell 8.4v self-charging battery recharges continuously during train

operation and should last for up to five years. The battery is a dry battery that should not

leak or cause any damage to your engine. Depending upon when your engine was built,

Light Bulbs

Figure 5: Removing The Replaceable Lights

Headlight Replacement Instructions

Self Charging Battery Back-Up

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

No comments

MTH Electric Trains PREMIER GP 7/9 Operator's Manual Page 15