MTH Electric Trains E-33 Operations Instructions download pdf (Page 18)

E-33 Rectifier Operating Manual

USING “RESET" TO PROGRAM

PROTO-SOUND®

Proto-Sound® is equipped with several programmable features which are

accessed in the RESET state by moving the transformer throttle up and

down between full voltage and low voltage (8 volts) without shutting the

transformer off completely. Each time this is done you advance, one

feature at a time, through the available options. An air-release sound is

heard each time the throttle is advanced and returned. In addition, there are

special sounds to tell you what RESET position you are in.

For example, if you want

to select Feature 2, put the

engine in RESET, and

move the throttle up and

down from full throttle to

low two times. After the

second advance, you will

hear two “clinks"

indicating that the computer is now in Feature 2. Advance the throttle again

and you will hear three “clinks" for Feature 3. Advance it two more times

and you will hear a “clank" indicating that you are now in Feature 5.

Advance the throttle two more times and you will hear a “clank" and two

“clinks" indicating Feature 7. ((5 throttle advancements = 1 clank) + (2

throttle advancements = 2 clinks)). “Clank” + “Clink" + “Clink" = Feature

7. You can advance the throttle as quickly as you like (though you may not

hear the air-release sounds) and the computer will still remember the

number of times the throttle is advanced by playing back the number of

“Clinks" and “Clanks" to confirm the feature you’ve selected.

In RESET Mode

Move The Throttle

Up & Down From

High Voltage To Low

2 Times

Advance The Throttle

Up & Down From

High Voltage To Low

4 More Times

Listen For The

2 Clink Sounds

Listen For 1 Clank

And 1 Clink Sounds

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

MTH Electric Trains E-33 Operations Instructions Page 18