MTH Electric Trains E-33 Operations Instructions download pdf (Page 12)

RailKing E-33 Rectifier Electric Engine

Troubleshooting Loco-Sound

™

Problems

Although Loco-Sound has been designed and engineered for ease of use, you

may have some questions during initial operation. The following table should

answer most questions. If your problem cannot be resolved with this table,

contact M.T.H. for assistance (telephone: 410-381-2580; fax: 410-423-0009;

email: [email protected]; mail: 7020 Columbia Gateway Drive,

Columbia MD 21046-1532).

Starting Up

Horn

Bell

Remedy

When I first turn the power on, the

engine will not begin to run. I have to

turn the throttle off and then on again

to get the engine to operate.

I can’t get the horn to blow when I

press the whistle button.

I can’t get the bell to ring when I press

the bell button.

You may be pressing the button too

quickly. Try pressing the whistle button

more slowly, taking approximately one

full second to fully depress the button.

You may be pressing the button too

quickly. Try pressing the bell button

more slowly, taking approximately one

full second to fully depress the button.

This is normal behavior. To prevent

accidental high-speed start-ups, Loco-

Sound is programmed to start up in

neutral anytime track power has been

turned off for several seconds. See

the "Basic Operation" section for more

details.

Lock-out Remedy

I can’t get the engine to run after I

power up the transformer. It sits still

with the engine sounds running.

The engine won’t lock into forward,

neutral, or reverse.

The engine is locked into the neutral

position. Follow the procedure in the

“Lock into a Direction” section.

Engine speed must be below 10 scale

mph (approx. 10 volts or less in

conventional mode).

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

MTH Electric Trains E-33 Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Toys & accessories MTH Electric Trains E-33